Adhesive for tile over tile BAUCEM C2TE

The highly enriched cementitious mix is an ideal solution for elastic bonding of various flooring with previous substrates of this type or other minerals.

10 in stock

SKU: adhesive-for-tile-over-tile-baucem-c2te Category:

Quantity per carton

12 product

Мinimum quantity

100 product

Quantities per pallet

60 product

Delivery time

14 days



Cement-based dry mix with added polymers and plasticizers for added strength and flexibility.

The highly enriched cementitious mix is an ideal solution for elastic bonding of various stones, ceramic tiles, pool tiles, granite, aerated concrete, porcelain, marble, natural stone, brick and other stone finishes to previous substrates of this type or other minerals. The increase in adhesion and elasticity ensures excellent results in exterior stone cladding under high thermal and static loads.

Product handling and risks:

The adhesive contains Portland cement which is an eye, skin and respiratory irritant.
Work with protective clothing.
In case of eye contact, wash thoroughly with water and seek medical attention.
More information in the safety data sheet.

Store in dry areas, not permanently exposed to moisture, on wooden pallets.

Shelf life in original sealed containers – 12 months from date of manufacture.


In paper bags with a net weight 25 kg

On pallets of 42 bags = 1050 kg

0/5 (0 Reviews)
Download - Performance Declaration

Download - Datasheet

Consumption rate approx. 3,5 – 5 kg/ sqm
Mix ratio approx. 5,25 - 6,5 liters on 25 kg
Time to deployment 60 min.
Open time 15 min.
Application temperature 5° C – 30° C
Packaging bag 25 kg

The adhesive mixture is applied to the substrate with a toothed trowell. The size of the rasp teeth depends on the size of the tiles and the smoothness of the substrate. The adhesive allows the tiles to set 10-20 minutes after installation.

The substrate is prepared as follows: it is thoroughly cleaned of substances that may interfere with adhesion: grease, lubricating oils, paints, varnishes, water dispersion paints, etc. Irregularities in the substrate must be previously smoothed out by plastering. When working on dry surfaces such as cellular concrete, gypsum board, lightened concrete, etc., it is best to use a dry adhesive.

Mixture preparation: Mix five parts dry adhesive with one part water in a suitable container, pouring the water first and then adding the mixture. Mix well with a mechanical stirrer for 1-2 minutes or until a homogeneous mixture is obtained.

The mixture thus prepared is allowed to "ripen" for 5 minutes, after which it is stirred again. The amount of water depends on the desired density of the adhesive mixture. Do not add other materials such as cement, sand, etc. to the adhesive so as not to impair its properties.