Loading...
FAIENCE AND TERRACOTTA GLUE BAUCEM C2

Faience and terracotta glue BAUCEM C2

Adhesive mixture suitable for bonding faience, terracotta, ceramic tiles, granite, porcelain, marble and other facade finishes. Also suitable for wet rooms.

Make an inquiry
View Compare
SKU: faience-and-terracotta-glue-baucem-c2 Category:

Quantity per carton

12 product

Мinimum quantity

100 product

Quantities per pallet

60 product

Delivery time

14 days

Loading...

Description

Cement-based dry mix with added polymers and plasticizers for added strength and flexibility.

Adhesive mixture suitable for bonding faience, terracotta, ceramic tiles, porcelain, marble and other facade finishes.

The adhesive is suitable for use in areas permanently exposed to moisture or water such as bathrooms and swimming pools.

Product handling and risks:

The adhesive contains Portland cement which is an eye, skin and respiratory irritant.
Work with protective clothing.
In case of eye contact, wash thoroughly with water and seek medical attention.
More information in the safety data sheet.

Store in dry areas, not permanently exposed to moisture, on wooden pallets.

Shelf life in original sealed containers – 12 months from date of manufacture.

Packaging:

In paper bags with a net weight of 5 kg / 25 kg each

On pallets of 42 bags = 1050 kg

0/5 (0 Reviews)
Tensile strength after 28 days 2.6 N/sq.mm
Tensile strength after immersion in water 2.8 N/sq.mm
Tensile strength after thermal treatment 2.8 N/sq.mm
Vitality  4 hours
Adhesive open time 10-15 min.
Outside use Yes
Inside use Yes
Dense hardening 24 hours
Consumtion rate Walls - spatola 5 mm Flоor – spatola 7 mm 3.5 kg./sq.m 4.5 kg./sq.m
The adhesive mixture is applied to the substrate with a toothed trowell. The size of the rasp teeth depends on the size of the tiles and the smoothness of the substrate. The adhesive allows the tiles to set 10-20 minutes after installation.

The substrate is prepared as follows: it is thoroughly cleaned of substances that may interfere with adhesion: grease, lubricating oils, paints, varnishes, water dispersion paints, etc. Irregularities in the substrate must be previously smoothed out by plastering. When working on dry surfaces such as cellular concrete, gypsum board, lightened concrete, etc., it is best to use a dry adhesive.

Mixture preparation: Mix five parts dry adhesive with one part water in a suitable container, pouring the water first and then adding the mixture. Mix well with a mechanical stirrer for 1-2 minutes or until a homogeneous mixture is obtained.

The mixture thus prepared is allowed to "ripen" for 5 minutes, after which it is stirred again. The amount of water depends on the desired density of the adhesive mixture. Do not add other materials such as cement, sand, etc. to the adhesive so as not to impair its properties.